Make: | Jeep |
---|---|
Model: | Grand Cherokee |
Model Code: | WK |
Model Year: | 2008 - 2008 |
OE Sensor Manufacturer: | SCHRADER |
OE Sensor Number: | 56029481AB |
Sensor Frequency: | 433 MHz |
The following sensors are all compatible with: Jeep Grand Cherokee 2008-2008.
TECH-A66DG
Hybrid 2.0 Snap-In Dual-Frequency Sensor
U-Pro Hybrid 2.0 Sensor The only dual frequency, configurable and programmable TPMS sensor. 97% of direct TPMS-enabled vehicle c... (more)
This vehicle may come fitted with any one of four OE sensor types, as listed below.
Please click the relevant sensor description to show the compatible service parts.
TECH6-201
Box Of 10 Replacement Valves for VDO TG1B
A box of 10 clamp-in valves, with each including: 1 valve stem, 1 nut, 1 rubber grommet, 1 plastic washer, 1 valve cap and 1 valve... (more)
TECH6-129
Box Of 10 Service Kits for VDO TG1B
A box of 10 service kits, with each including: 1 nut, 1 rubber grommet, 1 plastic washer, 1 valve cap and 1 valve core. These se... (more)
TECH6-138
Box Of 10 Service Kits for VDO TG1C
A box of 10 service kits, with each including: 1 nut, 1 rubber grommet, 1 plastic washer, 1 valve cap and 1 valve core. This ser... (more)
TECH6-207
Box Of 10 Replacement Snap-In Valves for Schrader Rev 4
A box of 10 snap-in valves. These valves are self-threading and suitable for use with Schrader gen 4 type sensors.a box of 10 sn... (more)
TECH6-216
Box Of 10 Replacement Clamp-In Valves for Schrader Rev 4
A box of 10 clamp-in valves, with each including: 1 valve stem, 1 nut, 1 rubber grommet, 1 plastic washer, 1 valve cap and 1 valve... (more)
TECH6-203
Box Of 10 replacement Clamp-In Valves for Schrader REV 4
A box of 10 clamp-in valves, with each including: 1 valve stem, 1 nut, 1 rubber grommet, 1 valve cap and 1 valve core. These val... (more)
TECH6-225
Box Of 10 replacement Clamp-In Valves for Schrader REV 5
A box of 10 clamp-in valves, with each including: 1 valve stem, 1 nut, 1 valve cap and 1 valve core. These valves are suitable f... (more)
TECH6-228T
Box Of 10 Replacement Clamp-In Valves for Schrader Gen Alpha
A box of 10 clamp-in valves, with each including: 1 valve stem, 1 domed washer. These valves are suitable for use with Schrader ... (more)
TECH6-228
Replacement Clamp-In Valve for Schrader Gen Alpha
Clamp-in valve, including: 1 valve stem, 1 domed washer. These valve are suitable for use with Schrader Gen Alpha type sensors.... (more)
TECH6-120
Box Of 10 Service Kits for Schrader Gen Alpha
A box of 10 service kits, with each including: 1 nut, 1 rubber grommet, 1 valve cap and 1 valve core. These service kits are sui... (more)
You must be logged in to view relearn procedures.
Every effort is made to ensure that this page is as accurate as possible, however the information cannot be guaranteed.