Kia - Rondo - 2007 - 2012

HOME WEBVT SOFTWARE TPMS VEHICLE LOOK-UP

PRODUCTS

U-PRO TPMS WORKSHOP TOOLS TPMS DIAGNOSTIC TOOLS TPMS CONSUMABLES TPMS Valves TPMS Service Kits

☰

HOME WEBVT SOFTWARE TPMS VEHICLE LOOK-UP

PRODUCTS

U-PRO TPMS WORKSHOP TOOLS TPMS DIAGNOSTIC TOOLS TPMS CONSUMABLES TPMS Valves TPMS Service Kits

Vehicle TPMS Information

Make	Kia
Model	Rondo
Model Code	UN
Model Year	2007 - 2012
OE Sensor Manufacturer	Huf
Sensor Frequency	315 MHz
OE Sensor Number	529332G200;

Replacement Parts Service Parts Relearn Procedure

The following sensors are all compatible with: Kia Rondo 2007-2012.

Configurable and Programmable Sensors

TECH-A66DG

Hybrid 2.0 Snap-In Dual-Frequency Sensor

U-Pro Hybrid 2.0 Sensor The only dual frequency, configurable and programmable TPMS sensor. 97% of direct TPMS-enabled vehicle coverage with 100% potential due to continual programmable updates. Configure and program sensor in 1-3 and 7-10 seconds respectively - the fastest times on the market. Dual valve capability - allowing independent replacement of the valve stem, and the ability to exchange between an Alloy Clamp-In, Black Clamp-In, Graphite Clamp-In or Snap-In valve. Reliable Maxell battery, with the latest NXP chipset and lightweight, durable housing. Designed for optimum compatibility with OE and aftermarket wheels - no adjustment necessary. Auto-location functionality for LOS, WAL, PAL and SAL. The use of 315Mhz is prohibited in Europe.

Service parts for the Huf Gen 1 Clamp-In style sensor

+

-

TECH6-220B

Box Of 10 Replacement Clamp-In Gen 1 Valves for HUF - 43mm

A box of 10 clamp-in valves, with each including: 1 valve stem, 1 nut, 1 rubber grommet, 1 plastic washer, 1 valve cap and 1 valve core. These valves are suitable for use with Huf Gen 1 type sensors. The length of this valve is 43mm.

TECH6-222B

Box Of 10 Replacement Clamp-In Gen 1 Valves for HUF - 49mm

A box of 10 clamp-in valves, with each including: 1 valve stem, 1 nut, 1 rubber grommet, 1 anti-rotation pin, 1 screw, 1 valve cap and 1 valve core. These valves are suitable for use with Huf Gen 1 type sensors. The length of this valve is 49mm.

TECH6-223B

Box Of 10 Replacement Clamp-In Gen 1 Valves for HUF - 51mm

A box of 10 clamp-in valves, with each including: 1 valve stem, 1 nut, 1 rubber grommet, 1 metal washer,1 screw , 1 anti-rotation pin 1 valve cap and 1 valve core. These valves are suitable for use with Huf Gen 1 type sensors. The length of this valve is 51mm.

TECH6-110

Box Of 10 Service Kits for HUF Sensor

A box of 10 service kits with each including: 1 nut, 1 rubber grommet, 2 metal washers, 1 screw, 1 valve core, 1 anti-rotation pin and 1 valve cap Used for the Huf Gen 1 ball-joint type TPMS valves for early Huf, TRW and Lear sensors. Please note that this service kit cannot be used on gen2 or higher versions of the valve.

TECH6-221

Box Of 10 Replacement Clamp-In Gen 1 Valves for HUF - 48mm

A box of 10 clamp-in valves, with each including: 1 valve stem, 1 nut, 1 rubber grommet, 1 anti-rotation pin,1 screw , 1 valve cap and 1 valve core.. These valves are suitable for use with Huf Gen 1 type sensors. The length of this valve is 48mm.

TECH6-204

Box Of 10 Replacement Clamp-In Gen 1 Valves for HUF-56mm

A box of 10 clamp-in valves, with each including: 1 valve stem, 1 nut, 1 valve cap and 1 valve core. These valves are suitable for use with Huf Gen 1 type sensors. The length of this valve is 56mm.

TECH6-220

Replacement Clamp-In Gen 1 Valve for HUF - 43mm

A Box of 10 Clamp-in valves, each including: 1 valve stem, 1 nut, 1 rubber grommet, 1 plastic washer, 1 valve cap and 1 valve core. These valve are suitable for use with Huf Gen 1 type sensors. The length of this valve is 43mm.

You must be logged in to view relearn procedures.

Every effort is made to ensure that this page is as accurate as possible, however the information cannot be guaranteed.