| Make | Mercedes-Benz |
|---|---|
| Model | SLR Class 433 MHz |
| Model Code | 199 |
| Model Year | 2001 - 2007 |
| OE Sensor Manufacturer | Huf |
| Sensor Frequency | 433 MHz |
| OE Sensor Number | A0008223306; |
The following sensors are all compatible with: Mercedes-Benz SLR Class 2001-2007.
A box of 10 clamp-in valves, with each including: 1 valve stem, 1 nut, 1 rubber grommet, 1 plastic washer, 1 valve cap and 1 valve core. These valves are suitable for use with Huf Gen 1 type sensors. The length of this valve is 43mm.
A box of 10 clamp-in valves, with each including: 1 valve stem, 1 nut, 1 rubber grommet, 1 anti-rotation pin, 1 screw, 1 valve cap and 1 valve core. These valves are suitable for use with Huf Gen 1 type sensors. The length of this valve is 49mm.
A box of 10 clamp-in valves, with each including: 1 valve stem, 1 nut, 1 rubber grommet, 1 metal washer,1 screw , 1 anti-rotation pin 1 valve cap and 1 valve core. These valves are suitable for use with Huf Gen 1 type sensors. The length of this valve is 51mm.
A box of 10 clamp-in valves, with each including: 1 valve stem, 1 nut, 1 rubber grommet, 1 plastic washer, 1 valve cap and 1 valve core. These valves are suitable for use with Huf Gen 2 type sensors. The length of this valve is 43mm
A box of 10 service kits with each including: 1 nut, 1 rubber grommet, 2 metal washers, 1 screw, 1 valve core, 1 anti-rotation pin and 1 valve cap Used for the Huf Gen 1 ball-joint type TPMS valves for early Huf, TRW and Lear sensors. Please note that this service kit cannot be used on gen2 or higher versions of the valve.
A box of 10 clamp-in valves, with each including: 1 valve stem, 1 nut, 1 rubber grommet, 1 anti-rotation pin,1 screw , 1 valve cap and 1 valve core.. These valves are suitable for use with Huf Gen 1 type sensors. The length of this valve is 48mm.
A box of 10 clamp-in valves, with each including: 1 valve stem, 1 nut, 1 valve cap and 1 valve core. These valves are suitable for use with Huf Gen 1 type sensors. The length of this valve is 56mm.
A Box of 10 Clamp-in valves, each including: 1 valve stem, 1 nut, 1 rubber grommet, 1 plastic washer, 1 valve cap and 1 valve core. These valve are suitable for use with Huf Gen 1 type sensors. The length of this valve is 43mm.
Every effort is made to ensure that this page is as accurate as possible, however the information cannot be guaranteed.
