Nissan - Juke - 2012 - 2012

HOME WEBVT SOFTWARE TPMS VEHICLE LOOK-UP

PRODUCTS

U-PRO TPMS WORKSHOP TOOLS TPMS DIAGNOSTIC TOOLS TPMS CONSUMABLES TPMS Valves TPMS Service Kits

☰

HOME WEBVT SOFTWARE TPMS VEHICLE LOOK-UP

PRODUCTS

U-PRO TPMS WORKSHOP TOOLS TPMS DIAGNOSTIC TOOLS TPMS CONSUMABLES TPMS Valves TPMS Service Kits

Vehicle TPMS Information

Make	Nissan
Model	Juke With I-Key;Built between 07/11-09/11
Model Code	F15
Model Year	2012 - 2012
OE Sensor Manufacturer	Continental
Sensor Frequency	315 MHz
OE Sensor Number	407003AN1A;

Replacement Parts Service Parts Relearn Procedure

The following sensors are all compatible with: Nissan Juke 2012-2012.

Configurable and Programmable Sensors

TECH-A66DG

Hybrid 2.0 Snap-In Dual-Frequency Sensor

U-Pro Hybrid 2.0 Sensor The only dual frequency, configurable and programmable TPMS sensor. 97% of direct TPMS-enabled vehicle coverage with 100% potential due to continual programmable updates. Configure and program sensor in 1-3 and 7-10 seconds respectively - the fastest times on the market. Dual valve capability - allowing independent replacement of the valve stem, and the ability to exchange between an Alloy Clamp-In, Black Clamp-In, Graphite Clamp-In or Snap-In valve. Reliable Maxell battery, with the latest NXP chipset and lightweight, durable housing. Designed for optimum compatibility with OE and aftermarket wheels - no adjustment necessary. Auto-location functionality for LOS, WAL, PAL and SAL. The use of 315Mhz is prohibited in Europe.

Service parts for the VDO TG1C Clamp-In style sensor

+

-

TECH6-139B

Box Of 10 Service Kits for VDO TG1C

A box of 10 service kits, with each including: 1 nut, 1 rubber grommet, 1 plastic washer, 1 valve cap and 1 valve core. This service kit is suitable for use with VDO TG1C type sensors.

TECH6-139

Service Kit for VDO TG1C

Service kit, including: 1 nut, 1 rubber grommet, 1 plastic washer, 1 valve cap and 1 valve core. These service kit are suitable for use with VDO TG1C type sensors.

TECH6-231C

Replacement Clamp-In Valve for VDO TG1C

Clamp-in valve, including: 1 valve stem and 1 valve cap. These valve are suitable for use with VDO TG1C type sensors.

You must be logged in to view relearn procedures.

Every effort is made to ensure that this page is as accurate as possible, however the information cannot be guaranteed.